24/7 dispatch across Austin, TX
Plumbing Repair in Austin, TX
Burst pipes, no hot water, sewer backing up into the tub, leak under the slab, gas line concerns — dispatched to licensed Texas plumbers.
Texaserv connects you with independent, licensed and insured contractors serving Austin and surrounding Harris/Dallas/Travis/Bexar-area suburbs. We don't do fake five-star badges or "15-minute guarantees" — response time is honest and quoted by dispatch.
Local Plumbing service, dispatched from Austin
Austin's rapid growth has outrun its 1970s–90s residential wiring. Panel upgrades and EV-charger installs are constant. Summers now regularly top 100°F for 60+ days, and the Hill Country limestone/caliche subgrade makes plumbing excavation slow and expensive.
What that means for plumbing in Austin: Slab leaks under older Hyde Park and Zilker homes; limestone means jackhammer excavation, not shovels.
Every job dispatched through Texaserv in Austin goes to an independently licensed local contractor — not a national call center reading a script. That means the tech knows local code, common failure patterns for Austin homes, and where to source parts locally when a job needs an unexpected fix.
Plumbing services we dispatch in Austin
The catalog below covers what our Austin network handles on a normal week. Nothing on this list is a bait-and-switch — if a tech quotes a scope different than what you called for, that gets flagged.
Emergency leak repair
Water line, drain line, supply line — shutoff and repair, then drywall coordination if needed.
Water heater repair or replacement
Tank (40–75 gal), tankless (Rinnai, Navien, Rheem). Gas or electric.
Drain cleaning (mechanical + hydro-jet)
Kitchen, bath, main line. Camera inspection available for recurring clogs.
Sewer line repair or replacement
Trenchless CIPP lining when the line runs allow it; excavation when they don't.
Slab leak detection & repair
Electronic detection first; reroute is often cheaper than break-out for single leaks.
Fixture install (toilet, faucet, disposal, water softener)
Homeowner-supplied hardware or contractor-supplied.
Gas line install / repair
Licensed for gas work; pressure-test after any repair.
Backflow prevention & testing
TCEQ-certified testing where required.
Most common plumbing problems we see in Austin
This list covers roughly 70% of the calls dispatched to Austin plumbing techs. Each includes the actual fix — no scare tactics, no upsell pressure.
No hot water anywhere
Gas: pilot out, thermocouple failed, or gas valve issue. Electric: heating element failed or high-limit tripped. Diagnostic $85-150; element replacement $250-450; full tank swap $1,400-2,600.
Toilet keeps running or refills randomly
Fill valve or flapper wear — $8-15 in parts, but pros do it in 20 minutes cleanly. Full rebuild kit + install $180-320.
Kitchen sink drain slow, then backed up
Grease buildup in the trap and horizontal branch line. Mechanical cabling $150-280; if it keeps recurring, hydro-jetting the branch $350-600.
Sewage smell in the house or backing up in a shower
Main line partial blockage or dry P-trap in an unused fixture. Camera inspection $200-400 pinpoints the location before any excavation. Cabling or jetting $350-700.
Foundation crack + unusually high water bill
Slab leak. Electronic detection first ($200-450), then reroute or spot-repair ($1,800-4,500). Do NOT let anyone jackhammer without confirming location first.
Honest pricing in Austin
Numbers below are the 2024–2025 market ranges we see in Austin. Actual quote depends on access, parts availability, and whether after-hours labor rates apply. You always get a written estimate before any work starts — nothing gets billed without your say-so.
| Service | Typical range |
|---|---|
| Diagnostic / service call | $85 – $150 |
| Toilet install (customer-supplied) | $180 – $320 |
| Water heater replacement (40 gal, gas) | $1,400 – $2,600 installed |
| Tankless water heater install (Navien 199k BTU) | $3,800 – $6,200 installed |
| Drain cleaning (single fixture) | $150 – $320 |
| Sewer main hydro-jetting | $350 – $700 |
| Slab leak reroute (single line) | $1,800 – $4,500 |
Why we publish these ranges: price opacity is the #1 complaint people have about home services. We'd rather scare off tire-kickers than surprise you on the invoice.
Realistic response time in Austin
We won't promise "15 minutes anywhere." That's marketing, not physics. What you can actually expect, based on hundreds of Austin dispatches:
- Inner-loop / downtown weekday daytime: tech dispatched within 15–30 min, on-site 30–60 min after call.
- Metro suburbs weekday daytime: on-site 45–90 min after call.
- Late-night / weekend / weather event: add 20–60 min to the above. Storms delay everything.
- Life-safety emergencies (gas leak, live wire, active water damage): we prioritize and dispatch the closest available tech, but we still won't lie about ETA. Call 911 first for gas leaks and live-wire hazards.
On the call, dispatch will give you an honest ETA window based on tech location at that moment. If the number they say is longer than you can wait, tell them — we'll help you decide whether another provider or 911 is the right call.
Neighborhoods and areas covered in Austin
Coverage across Austin and the wider Travis County metro. Freeways served: I-35, MoPac (Loop 1), US-183, US-290, SH-71, SH-130. Landmarks nearby: Austin-Bergstrom Airport, State Capitol, UT Austin, Zilker Park, The Domain.
Outside these areas? Call — we may still have a dispatchable tech in your zip code.
What actually happens on the tech visit
Every dispatched Austin plumbing visit follows the same core flow. This is not aspirational — it's how the invoice-flow works with our contractors:
- Tech arrives with pipe wrenches, cameras, cabling / jetting equipment as appropriate.
- Walks the fixture, tests supply and drain, isolates the failure point.
- Writes an estimate with parts and labor before starting.
- Executes repair, tests under pressure or full flow, checks for leaks.
- Leaves paperwork with warranty terms and any recommended follow-up.
If a tech skips the written-estimate step, or starts work without your verbal approval on the number, call the dispatch line immediately.
Seasonal considerations for Austin
Freeze events (Feb 2021 Uri, Jan 2024 Enzo) burst pipes at scale — wrap exposed pipes before every hard freeze forecast. Summer sees the most slab leaks as expansive clay dries and shifts. Fall is the best time for water heater flushes and shutoff-valve tests.
Materials, brands, and warranty
Workmanship warranty 1 year is standard from reputable Texas plumbing contractors. Water heater: 6-12 year tank warranty depending on model (Rheem, A.O. Smith, Bradford White). Tankless: 10-15 year heat exchanger warranty on premium units (Navien, Rinnai, Noritz).
How Texaserv dispatch works
- You call (512) 994-1596. A human answers, not an IVR maze.
- You describe the problem. Dispatch pulls the closest licensed plumbing contractor in Austin.
- You get an ETA and a base price. No fake "urgency premium" — the number is the number.
- Tech arrives, diagnoses, quotes. Written estimate before any work begins.
- You approve. Work is done. You pay the tech direct. Texaserv gets a small dispatch fee from the contractor — that's why we won't dispatch anyone with unresolved complaints.
What NOT to do before we arrive
- Don't sign a blank invoice or approve unwritten estimates. Ever. Any legitimate contractor writes the estimate first.
- Don't pay cash-only techs who won't provide a company name and license number. That's a red flag industry-wide.
- Don't attempt DIY on gas lines, live electrical panels, or slab excavation. These jobs kill people every year in Texas.
- Don't fall for "same-day upsell" pressure. If it's not truly an emergency, sleep on the quote — a real problem will still be there tomorrow.
Licensing, insurance, and how to verify
Every plumbing contractor we dispatch in Austin carries the appropriate Texas license for their trade — TDLR for electricians, TSBPE for plumbers, TDLR for HVAC, TDLR for tow operators, DPS for locksmiths. You can and should verify:
- Ask for the license number on arrival — a real tech carries an ID card.
- Look up the number at tdlr.texas.gov (or the appropriate board).
- Confirm general liability insurance — ask for a certificate before work if it's a large job.
Texaserv itself does not perform the service work. We are a dispatch and lead-generation platform connecting Austin-area customers with independent, licensed and insured contractors. All work is performed, invoiced, and warranted by the contractor.
Plumbing FAQ — Austin
What do I do if a pipe bursts in my Austin house?
First — shut off the main water valve. It's usually at the meter (curb box) or in the garage/utility room. Then shut off the electric water heater breaker or gas valve. Open a low faucet to drain remaining pressure. Then call. If it's a slab leak (hearing running water with no faucets on, or hot spots on the floor) don't try to break the concrete yourself — that's a specialist job.
How much does emergency plumbing cost in Austin?
Base service call runs $85–150 daytime, $150–275 nights/weekends. Actual repair depends heavily on access — a visible copper line joint under a sink is $150–350; a slab leak involving concrete breakout and reroute runs $1,800–4,500. A written estimate is always given before work starts.
Is trenchless sewer repair worth it over full excavation?
Trenchless (CIPP lining or pipe bursting) usually costs 10–30% more than excavation on paper — but saves the cost of landscape, driveway, or interior floor restoration, which can dwarf the pipe work itself. If the existing line's alignment is intact and the pipe hasn't fully collapsed, trenchless is almost always cheaper total.
Should I get a tank or tankless water heater?
Tank (40–50 gal) is cheaper upfront and simpler to service. Tankless gives endless hot water and lasts 20+ years but costs 2–3x more installed and requires larger gas line + venting upgrades. Best fit: tankless if you have concurrent showers/laundry, tank if it's just 1–2 people and you don't want to redo gas piping.
How do I know if I have a slab leak?
Warning signs: unexplained warm or wet spots on the floor, an unusually high water bill with no visible leak, the sound of running water when nothing's on, or a water heater that runs constantly. Electronic leak detection ($200–450) identifies the location before any concrete is broken.
Can plumbers also do gas line work?
In Texas, yes — with a Master Plumber license that includes gas endorsement. Gas line install and repair must be pressure-tested after work and, for new lines, permitted with the local building department. Never DIY gas line modifications.
Need plumbing help in Austin now?
Call and speak to a human. Honest ETA, honest price, licensed local tech.
Call (512) 994-1596